? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macomtech.com for additi onal data sheets and prod uct information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 1 silicon doubled balanced hmic mixer 700 - 1200 mhz rev. v3 mamx-000950-1225mt advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. features ?? sot-25 low cost miniature plastic package ?? 7.0 db typical conversion loss ?? +7 to +13 dbm lo drive ?? hmic ? patented process ?? silicon medium barrier schottky diodes ?? dc - 400 mhz if bandwidth ?? rohs* compliant with 260 c reflow capability ?? 100% matte tin plating description and applications m/a-com?s mamx-000950-1225mt is a 700-1200 mhz silicon monolithic double balanced mixer in a low cost miniature surface mount sot-25 package. the die uses m/a-com?s unique hmic s ilicon/glass process to achieve low loss passive elements while retaining the advantages of medium barrier silicon schottky barrier diodes. these mixers are well suited for high volume wire- less and cellular applications where small size and repeatability are required. typical applications include frequency conversion, modulation, and demodulation in wireless receivers and transmitters. sot-25 package outline (topview) absolute maximum ratings 1,2 parameter maximum ratings operating temperature -65 c to +125 c storage temperature -65 c to +150 c incident lo power +20 dbm incident rf power +20 dbm soldering temperature +260 c max. 1. exceeding these limits may cause permanent damage. 2. please refer to applicati on note m538 for surface mounting instructions. lo if rf schematic pin configuration pin function pin function 1 rf 4 gnd 2 gnd 5 if 3 lo 2 3 1 4 5 * restrictions on hazardous substanc es, european union directive 2002/95/ec.
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macomtech.com for additi onal data sheets and prod uct information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 2 silicon doubled balanced hmic mixer 700 - 1200 mhz rev. v3 mamx-000950-1225mt advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. electrical specificat ions @ +25 c parameter frequency range test conditions units min. typ. max. conversion loss 850 mhz 0.7-1.2 ghz lo drive = +10 dbm rf = -10 dbm, if = 60 mhz db 7.0 8.1 8.0 10.5 l - r isolation 850 mhz 0.7-1.2 ghz lo drive = +10 dbm rf level = -10 dbm db 26.0 20.5 l - i isolation 850 mhz 0.7-1.2 ghz lo drive = +10 dbm rf level = -10 dbm db 26.5 27.0 r - i isolation 850 mhz 0.7-1.2 ghz lo drive = +10 dbm rf level = -10 dbm db 27.5 24.0 rf vswr 850 mhz 0.7-1.2 ghz lo drive = +10 dbm rf level = -10 dbm 1.6:1 2.5:1 - - if vswr dc - 400 mhz lo drive = +10 dbm rf level = -10 dbm 1.05:1 - input ip3 850 mhz 0.7-1.2 ghz lo drive = +10 dbm rf = -5 dbm, if = 60 mhz dbm 18.5 13.0 20.5 18.0 input 1 db compression 850 mhz 0.7-1.2 ghz lo drive = +10 dbm if = 60 mhz dbm 4.3 5.6 if 1 db bandwidth dc - 400 mhz lo = 850 mhz @ +5dbm mhz 0 400.0 lo vswr 850 mhz 0.7-1.2 ghz lo drive = +10 dbm rf level = -10 dbm 1.8:1 1.8:1 - -
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macomtech.com for additi onal data sheets and prod uct information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 3 silicon doubled balanced hmic mixer 700 - 1200 mhz rev. v3 mamx-000950-1225mt advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. typical performance curves (lo drive = +10 dbm, rf = -10 dbm, if = 60 mhz) rf and if vswr third order intercept and input 1 db compression power isolation conversion loss conversion loss characterization average plots p lo drive = 7, 10, 13dbm, p rf = -10dbm, f if = ls - 60mhz -11.00 -10.50 -10.00 -9.50 -9.00 -8.50 -8.00 -7.50 -7.00 -6.50 -6.00 700 725 750 775 800 825 850 875 900 925 950 975 1000 1025 1050 1075 1100 1125 1150 1175 1200 frequency ( m hz ) loss (db ) plo=7dbm plo=10dbm plo=13dbm isolation vs frequency plo = +10dbm , fif = ls 60mhz -35.00 -30.00 -25.00 -20.00 -15.00 -10.00 -5.00 0.00 700 725 750 775 800 825 850 875 900 925 950 975 1000 1025 1050 1075 1100 1125 1150 1175 1200 frequency ( m hz ) isolation(db ) (iso l - i) (iso l - r) (iso r - i) vswr t yp 1.00 1.50 2.00 2.50 3.00 3.50 4.00 4.50 5.00 700 725 750 775 800 825 850 875 900 925 950 975 1000 1025 1050 1075 1100 1125 1150 1175 1200 50 75 100 125 150 175 200 225 250 275 300 325 350 375 400 425 450 475 500 frequency ( m hz ) vswr ratio i -port l -port r -port p (lo) = +10dbm , p (rf) = -10dbm , f (if) = ls60mhz ip3 & 1db compression pt. p (lo) drive = 7,10,13dbm, p (rf) = -10dbm, f (if) = ls60mhz 0 5 10 15 20 25 700 750 800 850 900 950 1000 1050 1100 1150 1200 frequency ( m hz ) ip3 (dbm) plo=7dbm plo=10dbm plo=13dbm typical 1db co m p re ssi on
? north america tel: 800.366.2266 / fax: 978.366.2266 ? europe tel: 44.1908.574.200 / fax: 44.1908.574.300 ? asia/pacific tel: 81.44.844.8296 / fax: 81.44.844.8298 visit www.macomtech.com for additi onal data sheets and prod uct information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 4 silicon doubled balanced hmic mixer 700 - 1200 mhz rev. v3 mamx-000950-1225mt advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. sot-25 dimensions 3,4 case style - sot-25 ordering information part number package mamx-000950-1225mt tape and reel dim inches millimeters min. max. min. max. a .1103 .1181 2.80 3.10 b .1023 .1181 2.6 3.00 c 0.0355 .0512 0.9 1.30 d 0.0591 .0669 1.5 1.70 e .0374 ref. 0.95 ref. f .0138 .0197 .35 .50 g .0031 0.0079 .08 0.2 h .0002 .0059 .05 .15 j .0138 .0216 .35 .55 3. dimensions do not include mold flas, protrusion or gate burrs which shall not exceed 0.0098 in (.25mm) per side. 4. leads coplanarity should be 0.003 (0.08) max.
|
